Tehniskie dokumenti
Specifikācija
Brand
MolexSeries
MICRO-LATCH
Pitch
2.0mm
Number Of Contacts
3
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
2.0A
Series Number
53254
Voltage Rating
125.0 V
Izcelsmes valsts
Malaysia
Produkta apraksts
Right Angle Headers, 53254 Series
These Molex Micro-Latch 2.0 mm pitch Right Angle 53254 Series Pin Headers with a three-sided shroud mate with 51065 Series Housings typical stock number 688-2603 .
2.0mm Wire to Board Molex Micro-Latch
This system applies a friction lock mechanism where the noses on receptacle housings slide into the header wall openings. This ensures a durable mating and a protection of the electrical circuitry.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 2,26
€ 0,226 Katrs (Paka ir 10) (bez PVN)
€ 2,73
€ 0,273 Katrs (Paka ir 10) (Ieskaitot PVN)
Standarts
10
€ 2,26
€ 0,226 Katrs (Paka ir 10) (bez PVN)
€ 2,73
€ 0,273 Katrs (Paka ir 10) (Ieskaitot PVN)
Standarts
10
Pirkt iepakojumos
Daudzums | Vienības cena | Per Iepakojums |
---|---|---|
10 - 190 | € 0,226 | € 2,26 |
200 - 740 | € 0,165 | € 1,65 |
750 - 2990 | € 0,146 | € 1,46 |
3000 - 5990 | € 0,125 | € 1,25 |
6000+ | € 0,117 | € 1,17 |
Tehniskie dokumenti
Specifikācija
Brand
MolexSeries
MICRO-LATCH
Pitch
2.0mm
Number Of Contacts
3
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
2.0A
Series Number
53254
Voltage Rating
125.0 V
Izcelsmes valsts
Malaysia
Produkta apraksts
Right Angle Headers, 53254 Series
These Molex Micro-Latch 2.0 mm pitch Right Angle 53254 Series Pin Headers with a three-sided shroud mate with 51065 Series Housings typical stock number 688-2603 .
2.0mm Wire to Board Molex Micro-Latch
This system applies a friction lock mechanism where the noses on receptacle housings slide into the header wall openings. This ensures a durable mating and a protection of the electrical circuitry.