bez PVN
ar PVN
Meklējiet produktu, ražotāja kodu vai ražotāju
Detaļu saraksts
Pieteikties/Reģistrēties
0.00(bez PVN)
Tehniskie Dokumenti
Specifikācija
Brand
STMicroelectronicsProduct Type
General Purpose Driver
Output Current
30A
Pin Count
6
Fall Time
53μs
Package Type
HPAK
Driver Type
MOSFET
Rise Time
55μs
Minimum Supply Voltage
36V
Number of Drivers
1
Maximum Supply Voltage
36V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Length
6.6mm
Height
2.4mm
Standards/Approvals
No
Mount Type
Surface
Automotive Standard
AEC-Q100
Produkta Apraksts
The STMicroelectronics VN5T016AH-E is a device made using VI Power technology, intended for driving resistive or inductive loads with one side connected to ground. The active VCCpin voltage clamp protects the device against low energy spikes. This device integrates an analog current sense which delivers a current proportional to the load current. Fault conditions such as overload, over temperature or short to VCC are reported via the current sense pin. Its output current limitation protects the device in overload condition.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
Noliktavas stāvoklis patreiz nav pieejams
€ 7 500,00
€ 3,00 Katrs (Rulli ir 2500) (bez PVN)
€ 9 075,00
€ 3,63 Katrs (Rulli ir 2500) (Ieskaitot PVN)
2500
€ 7 500,00
€ 3,00 Katrs (Rulli ir 2500) (bez PVN)
€ 9 075,00
€ 3,63 Katrs (Rulli ir 2500) (Ieskaitot PVN)
Noliktavas stāvoklis patreiz nav pieejams
2500
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
Tehniskie Dokumenti
Specifikācija
Brand
STMicroelectronicsProduct Type
General Purpose Driver
Output Current
30A
Pin Count
6
Fall Time
53μs
Package Type
HPAK
Driver Type
MOSFET
Rise Time
55μs
Minimum Supply Voltage
36V
Number of Drivers
1
Maximum Supply Voltage
36V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Length
6.6mm
Height
2.4mm
Standards/Approvals
No
Mount Type
Surface
Automotive Standard
AEC-Q100
Produkta Apraksts
The STMicroelectronics VN5T016AH-E is a device made using VI Power technology, intended for driving resistive or inductive loads with one side connected to ground. The active VCCpin voltage clamp protects the device against low energy spikes. This device integrates an analog current sense which delivers a current proportional to the load current. Fault conditions such as overload, over temperature or short to VCC are reported via the current sense pin. Its output current limitation protects the device in overload condition.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
