bez PVN
ar PVN
Meklējiet produktu, ražotāja kodu vai ražotāju
Detaļu saraksts
Pieteikties/Reģistrēties
0.00(bez PVN)
Tehniskie Dokumenti
Specifikācija
Brand
STMicroelectronicsProduct Type
Power Management Development Kit
Power Management Function
Power Management
For Use With
Powering the Low-Voltage Digital Core in HDD Applications
Kit Classification
Evaluation Board
Featured Device
ST1S03
Kit Name
Demonstration Board
Standards/Approvals
RoHS
Izcelsmes valsts
Italy
Produkta Apraksts
The STEVAL-ISA042V2 demonstration board is a step-down DC-DC converter optimized for powering the low-voltage digital core in HDD applications and, more generally, replacing the high-current linear solution when the power dissipation may cause excessive heating of the application environment. It provides up to 1.5 A over an input voltage range of 3 V to 16 V.
A high switching frequency (1.5 MHz) allows the use of tiny surface-mounted components, as well as the use of a resistor divider to set the output voltage value. Only an inductor, a Schottky diode, and two capacitors are required. In addition, a low output ripple is guaranteed by the current-mode PWM topology and by the use of low ESR SMD ceramic capacitors. The device is thermal protected and current limited to prevent damage due to accidental short-circuits. It uses the ST1S03 device.
Noliktavas stāvoklis patreiz nav pieejams
€ 44,80
€ 44,80 Katrs (bez PVN)
€ 54,21
€ 54,21 Katrs (Ieskaitot PVN)
1
€ 44,80
€ 44,80 Katrs (bez PVN)
€ 54,21
€ 54,21 Katrs (Ieskaitot PVN)
Noliktavas stāvoklis patreiz nav pieejams
1
Tehniskie Dokumenti
Specifikācija
Brand
STMicroelectronicsProduct Type
Power Management Development Kit
Power Management Function
Power Management
For Use With
Powering the Low-Voltage Digital Core in HDD Applications
Kit Classification
Evaluation Board
Featured Device
ST1S03
Kit Name
Demonstration Board
Standards/Approvals
RoHS
Izcelsmes valsts
Italy
Produkta Apraksts
The STEVAL-ISA042V2 demonstration board is a step-down DC-DC converter optimized for powering the low-voltage digital core in HDD applications and, more generally, replacing the high-current linear solution when the power dissipation may cause excessive heating of the application environment. It provides up to 1.5 A over an input voltage range of 3 V to 16 V.
A high switching frequency (1.5 MHz) allows the use of tiny surface-mounted components, as well as the use of a resistor divider to set the output voltage value. Only an inductor, a Schottky diode, and two capacitors are required. In addition, a low output ripple is guaranteed by the current-mode PWM topology and by the use of low ESR SMD ceramic capacitors. The device is thermal protected and current limited to prevent damage due to accidental short-circuits. It uses the ST1S03 device.
