bez PVN
ar PVN
Tehniskie Dokumenti
Specifikācija
Brand
MicrochipMaximum Data Rate
100Mbps
Product Type
Ethernet Controller
Communication Mode
Full Duplex/Half Duplex
Number of Transceivers
2
Loopback Mode
Internal
Standard Supported
IEEE 802.3u
Interface Type
SPI
Pin Count
64
Maximum Supply Voltage
3.3V
Minimum Operating Temperature
0°C
Maximum Operating Temperature
70°C
Length
10mm
Minimum Supply Voltage
3.3V
Height
1.2mm
Standards/Approvals
No
Width
10mm
Automotive Standard
No
Produkta Apraksts
The Microchip LAN9252 series is a 2/3-port EtherCAT device controller with dual integrated Ethernet PHYs which each contain a full-duplex 100BASE-TX transceiver and support 100Mbps operation. The LAN9252 supports HP Auto-MDIX, allowing the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external Fibre transceiver. This device provides system developers a cost-effective solution for realizing EtherCAT device solutions.
Noliktavas stāvoklis patreiz nav pieejams
€ 1 920,00
€ 12,00 Each (In a Tray of 160) (bez PVN)
€ 2 323,20
€ 14,52 Each (In a Tray of 160) (Ieskaitot PVN)
160
€ 1 920,00
€ 12,00 Each (In a Tray of 160) (bez PVN)
€ 2 323,20
€ 14,52 Each (In a Tray of 160) (Ieskaitot PVN)
Noliktavas stāvoklis patreiz nav pieejams
160
Tehniskie Dokumenti
Specifikācija
Brand
MicrochipMaximum Data Rate
100Mbps
Product Type
Ethernet Controller
Communication Mode
Full Duplex/Half Duplex
Number of Transceivers
2
Loopback Mode
Internal
Standard Supported
IEEE 802.3u
Interface Type
SPI
Pin Count
64
Maximum Supply Voltage
3.3V
Minimum Operating Temperature
0°C
Maximum Operating Temperature
70°C
Length
10mm
Minimum Supply Voltage
3.3V
Height
1.2mm
Standards/Approvals
No
Width
10mm
Automotive Standard
No
Produkta Apraksts
The Microchip LAN9252 series is a 2/3-port EtherCAT device controller with dual integrated Ethernet PHYs which each contain a full-duplex 100BASE-TX transceiver and support 100Mbps operation. The LAN9252 supports HP Auto-MDIX, allowing the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external Fibre transceiver. This device provides system developers a cost-effective solution for realizing EtherCAT device solutions.