RS PRO Blue Low-Density Polyethylene Solder Sleeve 24.5mm Length 1.4 → 2.7mm Cable Diameter
Tehniskie dokumenti
Specifikācija
Brand
RS ProMinimum Cable Diameter
1.4mm
Maximum Cable Diameter
2.7mm
Sleeve Length
24.5mm
Material
Low-Density Polyethylene
Dielectric Strength
1kV
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Blue
Series
GAST
Shrink Temperature
>115°C
Standards Met
RoHS Compliant
Izcelsmes valsts
China
Produkta apraksts
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 55,50
1 iepakojums no 100 (bez PVN)
€ 67,16
1 iepakojums no 100 (Ieskaitot PVN)
1
€ 55,50
1 iepakojums no 100 (bez PVN)
€ 67,16
1 iepakojums no 100 (Ieskaitot PVN)
1
Pirkt iepakojumos
| Daudzums | Vienības cena |
|---|---|
| 1 - 4 | € 55,50 |
| 5 - 49 | € 53,00 |
| 50+ | € 48,60 |
Tehniskie dokumenti
Specifikācija
Brand
RS ProMinimum Cable Diameter
1.4mm
Maximum Cable Diameter
2.7mm
Sleeve Length
24.5mm
Material
Low-Density Polyethylene
Dielectric Strength
1kV
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Blue
Series
GAST
Shrink Temperature
>115°C
Standards Met
RoHS Compliant
Izcelsmes valsts
China
Produkta apraksts
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.