TE Connectivity Blue Polyolefin Solder Sleeve 18.54mm Length 0.76 → 1.52mm Cable Diameter
Tehniskie dokumenti
Specifikācija
Brand
TE ConnectivityMinimum Cable Diameter
0.76mm
Maximum Cable Diameter
1.52mm
Sleeve Length
18.54mm
Material
Polyolefin
Voltage Rating
600 V
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+125°C
Colour
Blue
Series
D-110
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Izcelsmes valsts
Mexico
Produkta apraksts
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 1,25
Katrs (Paka ir 500) (bez PVN)
€ 1,512
Katrs (Paka ir 500) (Ieskaitot PVN)
500
€ 1,25
Katrs (Paka ir 500) (bez PVN)
€ 1,512
Katrs (Paka ir 500) (Ieskaitot PVN)
500
Pirkt iepakojumos
| Daudzums | Vienības cena | Per Iepakojums |
|---|---|---|
| 500 - 7000 | € 1,25 | € 625,00 |
| 7500 - 24500 | € 1,20 | € 600,00 |
| 25000+ | € 1,10 | € 550,00 |
Tehniskie dokumenti
Specifikācija
Brand
TE ConnectivityMinimum Cable Diameter
0.76mm
Maximum Cable Diameter
1.52mm
Sleeve Length
18.54mm
Material
Polyolefin
Voltage Rating
600 V
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+125°C
Colour
Blue
Series
D-110
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Izcelsmes valsts
Mexico
Produkta apraksts
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.