Tehniskie dokumenti
Specifikācija
Brand
SensirionMedia Monitored
Liquid
Device Type
Liquid Flow Switch
Minimum Flow Rate
250 (Isopropyl Alcohol)
Maximum Flow Rate
250 (Isopropyl Alcohol) mL/min, 50 (Water) mL/min
Supply Voltage
5 → 12 V
Pipe Diameter Range
9.2 mm
Connection Type
5 Pin PCB Header
Maximum Pressure
3bar
Material
Borosilicate Glass (Tube Material), FEP (Sealing), PEEk (Fitting)
Minimum Operating Temperature
+10°C
Maximum Operating Temperature
+50°C
Current Rating
6.8 mA
Izcelsmes valsts
Switzerland
Produkta apraksts
LG01-2000A Liquid Flow Switch & Bubble Detectors
The LG01-2000A family of liquid flow switches from Sensirion are able to detect liquid flow by millilitres per minute (ml/min). It also provides bubble detection.
When the flow rate is more than the desired flow switch point, the output signal is 5 V. If the flow rate is lower than this point the output signal is 0 V. This is also the case for when air/bubbles are sensed within the sensors flow channel.
This non-invasive liquid flow switch has a straight glass capillary flow path. This also enables chemical resistance and bio-compatibility.
An additional Connectivity Kit can be purchased separately for the LG01 liquid flow switches.
Sensirion Liquid Flow Switches
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 120,00
Each (In a Tray of 25) (bez PVN)
€ 145,20
Each (In a Tray of 25) (Ieskaitot PVN)
25
€ 120,00
Each (In a Tray of 25) (bez PVN)
€ 145,20
Each (In a Tray of 25) (Ieskaitot PVN)
25
Tehniskie dokumenti
Specifikācija
Brand
SensirionMedia Monitored
Liquid
Device Type
Liquid Flow Switch
Minimum Flow Rate
250 (Isopropyl Alcohol)
Maximum Flow Rate
250 (Isopropyl Alcohol) mL/min, 50 (Water) mL/min
Supply Voltage
5 → 12 V
Pipe Diameter Range
9.2 mm
Connection Type
5 Pin PCB Header
Maximum Pressure
3bar
Material
Borosilicate Glass (Tube Material), FEP (Sealing), PEEk (Fitting)
Minimum Operating Temperature
+10°C
Maximum Operating Temperature
+50°C
Current Rating
6.8 mA
Izcelsmes valsts
Switzerland
Produkta apraksts
LG01-2000A Liquid Flow Switch & Bubble Detectors
The LG01-2000A family of liquid flow switches from Sensirion are able to detect liquid flow by millilitres per minute (ml/min). It also provides bubble detection.
When the flow rate is more than the desired flow switch point, the output signal is 5 V. If the flow rate is lower than this point the output signal is 0 V. This is also the case for when air/bubbles are sensed within the sensors flow channel.
This non-invasive liquid flow switch has a straight glass capillary flow path. This also enables chemical resistance and bio-compatibility.
An additional Connectivity Kit can be purchased separately for the LG01 liquid flow switches.