Tehniskie dokumenti
Specifikācija
Brand
WagoManufacturer Series
750
For Use With
750 Series
Network Type
Ethernet
Interface
Ethernet
Programming Interface
Ethernet
Minimum Operating Temperature
0°C
Mounting Type
DIN Rail
Programming Language Used
CFC, FBD, Ladder Logic, SFC
Maximum Operating Temperature
+55°C
Dimensions
71.9 x 61.5 x 100 mm
Standards Met
UL
Communication Port Type
RJ-45
Depth
71.9mm
Length
100mm
Width
61.5mm
Memory
1024 kB
Izcelsmes valsts
Germany
Produkta apraksts
ETHERNET Media Redundancy Programmable Fieldbus Controller
PLC - ETHERNET Media Redundancy Programmable Fieldbus Controller connects ETHERNET to the modular WAGO-I/O-System, and is used in ETHERNET networks requiring fast and safe media redundancy.
Media redundancy is achieved by operating the controller in two separate networks, in which it is accessible via two different IP addresses (including two MAC IDs). Cross communication between separate channels is not possible. The two separate ETHERNET interfaces allow redundant connection of two transmission paths (no hub or switch required).
Wago I/O system range
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 748,14
Katrs (bez PVN)
€ 905,25
Katrs (Ieskaitot PVN)
1
€ 748,14
Katrs (bez PVN)
€ 905,25
Katrs (Ieskaitot PVN)
1
Tehniskie dokumenti
Specifikācija
Brand
WagoManufacturer Series
750
For Use With
750 Series
Network Type
Ethernet
Interface
Ethernet
Programming Interface
Ethernet
Minimum Operating Temperature
0°C
Mounting Type
DIN Rail
Programming Language Used
CFC, FBD, Ladder Logic, SFC
Maximum Operating Temperature
+55°C
Dimensions
71.9 x 61.5 x 100 mm
Standards Met
UL
Communication Port Type
RJ-45
Depth
71.9mm
Length
100mm
Width
61.5mm
Memory
1024 kB
Izcelsmes valsts
Germany
Produkta apraksts
ETHERNET Media Redundancy Programmable Fieldbus Controller
PLC - ETHERNET Media Redundancy Programmable Fieldbus Controller connects ETHERNET to the modular WAGO-I/O-System, and is used in ETHERNET networks requiring fast and safe media redundancy.
Media redundancy is achieved by operating the controller in two separate networks, in which it is accessible via two different IP addresses (including two MAC IDs). Cross communication between separate channels is not possible. The two separate ETHERNET interfaces allow redundant connection of two transmission paths (no hub or switch required).