Tehniskie dokumenti
Specifikācija
Brand
Texas InstrumentsNumber of Transceivers
1
IC Type
Controller IC
Protocols Supported
USB 3.0
Power Supply Type
Single
ESD protection
Yes
Typical Single Supply Voltage
1.1 V, 3.3 V
Mounting Type
Surface Mount
Package Type
HTQFP
Pin Count
48
Dimensions
7.2 x 7.2 x 1.05mm
Height
1.05mm
Length
7.2mm
Maximum Operating Temperature
+70 °C
Minimum Operating Temperature
0 °C
Width
7.2mm
Produkta apraksts
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.
USB (Universal Serial Bus), Texas Instruments
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 6,60
Katrs (bez PVN)
€ 7,99
Katrs (Ieskaitot PVN)
1
€ 6,60
Katrs (bez PVN)
€ 7,99
Katrs (Ieskaitot PVN)
1
Pirkt iepakojumos
Daudzums | Vienības cena |
---|---|
1 - 9 | € 6,60 |
10+ | € 5,90 |
Tehniskie dokumenti
Specifikācija
Brand
Texas InstrumentsNumber of Transceivers
1
IC Type
Controller IC
Protocols Supported
USB 3.0
Power Supply Type
Single
ESD protection
Yes
Typical Single Supply Voltage
1.1 V, 3.3 V
Mounting Type
Surface Mount
Package Type
HTQFP
Pin Count
48
Dimensions
7.2 x 7.2 x 1.05mm
Height
1.05mm
Length
7.2mm
Maximum Operating Temperature
+70 °C
Minimum Operating Temperature
0 °C
Width
7.2mm
Produkta apraksts
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.