Tehniskie dokumenti
Specifikācija
Brand
Texas InstrumentsComparator Type
Low Power
Mounting Type
Surface Mount
Package Type
MSOP
Power Supply Type
Single
Output Type
Push-Pull
Number of Channels per Chip
1
Typical Response Time
2.9ns
Pin Count
8
Typical Single Supply Voltage
2.7 → 5.5 V
Dimensions
3.1 x 3.1 x 0.95mm
Length
3.1mm
Width
3.1mm
Height
0.95mm
Typical CMRR
70dB
Minimum Operating Temperature
-40 °C
Typical PSRR
85dB
Maximum Operating Temperature
+125 °C
Produkta apraksts
TLV series Low Voltage Comparators
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
€ 57,50
€ 1,15 Katrs (tiek piegadats Tubina) (bez PVN)
€ 69,58
€ 1,392 Katrs (tiek piegadats Tubina) (Ieskaitot PVN)
Industriālais iepakojums (Penālis)
50
€ 57,50
€ 1,15 Katrs (tiek piegadats Tubina) (bez PVN)
€ 69,58
€ 1,392 Katrs (tiek piegadats Tubina) (Ieskaitot PVN)
Industriālais iepakojums (Penālis)
50
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
Daudzums | Vienības cena | Per Penālis |
---|---|---|
50 - 90 | € 1,15 | € 11,50 |
100+ | € 1,10 | € 11,00 |
Tehniskie dokumenti
Specifikācija
Brand
Texas InstrumentsComparator Type
Low Power
Mounting Type
Surface Mount
Package Type
MSOP
Power Supply Type
Single
Output Type
Push-Pull
Number of Channels per Chip
1
Typical Response Time
2.9ns
Pin Count
8
Typical Single Supply Voltage
2.7 → 5.5 V
Dimensions
3.1 x 3.1 x 0.95mm
Length
3.1mm
Width
3.1mm
Height
0.95mm
Typical CMRR
70dB
Minimum Operating Temperature
-40 °C
Typical PSRR
85dB
Maximum Operating Temperature
+125 °C
Produkta apraksts
TLV series Low Voltage Comparators
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.