Telemecanique Sensors XCSM Series Roller Plunger Interlock Switch, 2NO/2NC, IP66, IP67, IP68, 4P, Metal Housing
Tehniskie dokumenti
Specifikācija
Actuator Type
Roller Plunger
Pole and Throw Configuration
4P
Normal State Configuration
2NO/2NC
IP Rating
IP66, IP67, IP68
Housing Material
Metal
Connection Type
Cable
Series
XCSM
Length
30mm
Width
16mm
Maximum Operating Temperature
+70°C
Depth
70.4mm
Minimum Operating Temperature
-25°C
Standards Met
CSA, UL
Operating Force
7 N
Mechanical Life
10000000Cycles
Mounting Orientation
Horizontal
Produkta apraksts
XCSM Series, Safety Limit Switches
The Schneider XCSM series of miniature/compact industrial limit switches are designed for monitoring access doors and/or guards on machines with low inertia and also on machines with high inertia, when used in conjunction with actuator operated guard switches. When used on their own they are always installed in ’positive mode’, but if combined in pairs then one switch in ’positive mode’ and the other switch in ’negative mode’. Available with a linear movement (plunger) or rotary movement (lever).
Approvals
UL, CSA.
Standards
CSA C22-2 No 14, EN 1088, EN/IEC 60204-1, EN/IEC 60947-5-1, UL 508.
Safety Limit Switch
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 131,00
Katrs (bez PVN)
€ 158,51
Katrs (Ieskaitot PVN)
1
€ 131,00
Katrs (bez PVN)
€ 158,51
Katrs (Ieskaitot PVN)
1
Tehniskie dokumenti
Specifikācija
Actuator Type
Roller Plunger
Pole and Throw Configuration
4P
Normal State Configuration
2NO/2NC
IP Rating
IP66, IP67, IP68
Housing Material
Metal
Connection Type
Cable
Series
XCSM
Length
30mm
Width
16mm
Maximum Operating Temperature
+70°C
Depth
70.4mm
Minimum Operating Temperature
-25°C
Standards Met
CSA, UL
Operating Force
7 N
Mechanical Life
10000000Cycles
Mounting Orientation
Horizontal
Produkta apraksts
XCSM Series, Safety Limit Switches
The Schneider XCSM series of miniature/compact industrial limit switches are designed for monitoring access doors and/or guards on machines with low inertia and also on machines with high inertia, when used in conjunction with actuator operated guard switches. When used on their own they are always installed in ’positive mode’, but if combined in pairs then one switch in ’positive mode’ and the other switch in ’negative mode’. Available with a linear movement (plunger) or rotary movement (lever).
Approvals
UL, CSA.
Standards
CSA C22-2 No 14, EN 1088, EN/IEC 60204-1, EN/IEC 60947-5-1, UL 508.