TE Connectivity Blue Polyvinyl Fluoride Solder Sleeve 37.7mm Length 4.5 mm Cable Diameter 3.6 mm Cable Diameter
Technical Document
Specifications
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
37.7mm
Material
Polyvinyl Fluoride
Dielectric Strength
2kV
Minimum Cable Diameter
3.6mm
Maximum Cable Diameter
4.5mm
Colour
Blue
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Series
SGRS
Shrink Temperature
125°C
Country of Origin
Mexico
Product details
SolderGrip® insulated sleeves
These sealed sleeves enable several wires to be soldered together, for applications where a high degree of reliability is essential.
Recommended for locations that would be difficult to access later.
They feature a heat-fusion adhesive insert to ensure the splice is sealed.
Easy to use: simply place the wires in the SolderGrip using a twisting movement to lock them in position and heat the assembly with a hot air source to complete the soldering process.
Stock information temporarily unavailable.
€ 33.50
€ 3.35 Each (In a Pack of 10) (Exc. Vat)
€ 40.54
€ 4.054 Each (In a Pack of 10) (inc. VAT)
10
€ 33.50
€ 3.35 Each (In a Pack of 10) (Exc. Vat)
€ 40.54
€ 4.054 Each (In a Pack of 10) (inc. VAT)
Stock information temporarily unavailable.
10
Technical Document
Specifications
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
37.7mm
Material
Polyvinyl Fluoride
Dielectric Strength
2kV
Minimum Cable Diameter
3.6mm
Maximum Cable Diameter
4.5mm
Colour
Blue
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Series
SGRS
Shrink Temperature
125°C
Country of Origin
Mexico
Product details
SolderGrip® insulated sleeves
These sealed sleeves enable several wires to be soldered together, for applications where a high degree of reliability is essential.
Recommended for locations that would be difficult to access later.
They feature a heat-fusion adhesive insert to ensure the splice is sealed.
Easy to use: simply place the wires in the SolderGrip using a twisting movement to lock them in position and heat the assembly with a hot air source to complete the soldering process.