TE Connectivity Blue PVDF Solder Sleeve 54.1mm Length 4.06 → 8.76mm Cable Diameter

RS noliktavas nr.: 136-2092Ražotājs: TE ConnectivityRažotāja kods: D-110-0083
brand-logo
View all in Lodējamas čaulas

Tehniskie dokumenti

Specifikācija

Minimum Cable Diameter

4.1mm

Maximum Cable Diameter

9mm

Sleeve Length

54.1mm

Material

PVDF

Quantity

200

Colour

Blue

Series

D-110

PRICED TO CLEAR

Yes

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Izcelsmes valsts

Mexico

Produkta apraksts

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Noliktavas stāvoklis patreiz nav pieejams

Lūdzu pārbaudiet vēlreiz vēlāk

Noliktavas stāvoklis patreiz nav pieejams

€ 520,00

1 kaste no 200 (bez PVN)

€ 629,20

1 kaste no 200 (Ieskaitot PVN)

TE Connectivity Blue PVDF Solder Sleeve 54.1mm Length 4.06 → 8.76mm Cable Diameter

€ 520,00

1 kaste no 200 (bez PVN)

€ 629,20

1 kaste no 200 (Ieskaitot PVN)

TE Connectivity Blue PVDF Solder Sleeve 54.1mm Length 4.06 → 8.76mm Cable Diameter
Noliktavas stāvoklis patreiz nav pieejams

Tehniskie dokumenti

Specifikācija

Minimum Cable Diameter

4.1mm

Maximum Cable Diameter

9mm

Sleeve Length

54.1mm

Material

PVDF

Quantity

200

Colour

Blue

Series

D-110

PRICED TO CLEAR

Yes

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Izcelsmes valsts

Mexico

Produkta apraksts

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.