TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG

RS noliktavas nr.: 135-5110Ražotājs: TE ConnectivityRažotāja kods: 454100-000
brand-logo
View all in Savienotāji

Tehniskie dokumenti

Specifikācija

Splice Type

Butt

Wire Size

16 → 14 AWG

Overall Length

31.5mm

Diameter

4.6mm

Insulation

Insulated

Colour

Blue

Series

Duraseal

Contact Material

Copper

Contact Plating

Tin

Izcelsmes valsts

Mexico

Produkta apraksts

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Noliktavas stāvoklis patreiz nav pieejams

Lūdzu pārbaudiet vēlreiz vēlāk

Noliktavas stāvoklis patreiz nav pieejams

€ 820,00

1 kaste no 1000 (bez PVN)

€ 992,20

1 kaste no 1000 (Ieskaitot PVN)

TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG

€ 820,00

1 kaste no 1000 (bez PVN)

€ 992,20

1 kaste no 1000 (Ieskaitot PVN)

TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG
Noliktavas stāvoklis patreiz nav pieejams

Tehniskie dokumenti

Specifikācija

Splice Type

Butt

Wire Size

16 → 14 AWG

Overall Length

31.5mm

Diameter

4.6mm

Insulation

Insulated

Colour

Blue

Series

Duraseal

Contact Material

Copper

Contact Plating

Tin

Izcelsmes valsts

Mexico

Produkta apraksts

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed