SMC KQ2 Series Bulkhead Threaded-to-Tube Adaptor, Push In 6 mm to Push In 6 mm, Threaded-to-Tube Connection Style
Tehniskie dokumenti
Specifikācija
Brand
SMCConnector A
Push In 6 mm
Connector B
Push In 6 mm
Pneumatic Fitting Type
Bulkhead Threaded-to-Tube Adaptor
Connection Style
Threaded-to-Tube
Manufacturer Series
KQ2
Thread Material
Nickel Plated Brass
Body Material
Nickel Plated Brass
Minimum Operating Temperature
-5 °C, 0°C
Maximum Operating Temperature
+40 °C, +60°C
Finish
Nickel Plated
Maximum Operating Pressure
1 MPa, 3 MPa
Mounting Hole Diameter
15mm
Tube Connection A - Type
Push In
Izcelsmes valsts
Japan
Produkta apraksts
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.
Bulkhead Adapators
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 7,70
Katrs (Paka ir 10) (bez PVN)
€ 9,317
Katrs (Paka ir 10) (Ieskaitot PVN)
10
€ 7,70
Katrs (Paka ir 10) (bez PVN)
€ 9,317
Katrs (Paka ir 10) (Ieskaitot PVN)
10
Pirkt iepakojumos
| Daudzums | Vienības cena | Per Iepakojums |
|---|---|---|
| 10 - 40 | € 7,70 | € 77,00 |
| 50 - 90 | € 7,40 | € 74,00 |
| 100+ | € 6,80 | € 68,00 |
Tehniskie dokumenti
Specifikācija
Brand
SMCConnector A
Push In 6 mm
Connector B
Push In 6 mm
Pneumatic Fitting Type
Bulkhead Threaded-to-Tube Adaptor
Connection Style
Threaded-to-Tube
Manufacturer Series
KQ2
Thread Material
Nickel Plated Brass
Body Material
Nickel Plated Brass
Minimum Operating Temperature
-5 °C, 0°C
Maximum Operating Temperature
+40 °C, +60°C
Finish
Nickel Plated
Maximum Operating Pressure
1 MPa, 3 MPa
Mounting Hole Diameter
15mm
Tube Connection A - Type
Push In
Izcelsmes valsts
Japan
Produkta apraksts
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.