Sensata Crydom Solid State Relay, 7.6 A Load, DIN Rail Mount
Tehniskie dokumenti
Specifikācija
Brand
Sensata / CrydomMaximum Load Current
7.6 A
Mounting Type
DIN Rail Mount
Control Voltage Range
90 V ac → 140 V ac
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 V ac → 510V ac
Height
86.71mm
Length
45.31mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Depth
96.02mm
Izcelsmes valsts
Mexico
Produkta apraksts
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
€ 258,00
€ 258,00 Katrs (bez PVN)
€ 312,18
€ 312,18 Katrs (Ieskaitot PVN)
1
€ 258,00
€ 258,00 Katrs (bez PVN)
€ 312,18
€ 312,18 Katrs (Ieskaitot PVN)
1
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
Tehniskie dokumenti
Specifikācija
Brand
Sensata / CrydomMaximum Load Current
7.6 A
Mounting Type
DIN Rail Mount
Control Voltage Range
90 V ac → 140 V ac
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 V ac → 510V ac
Height
86.71mm
Length
45.31mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Depth
96.02mm
Izcelsmes valsts
Mexico
Produkta apraksts
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors