RS PRO Signal Conditioner, Current, Voltage Input, Current, Voltage Output, 10 → 30V dc Supply
Tehniskie dokumenti
Specifikācija
Brand
RS ProModule Type
Signal Isolator
Input Signal Type
Current, Voltage
Output Signal Type
Current, Voltage
Input Range
0 → 20 mA, -250 → +250V dc
Output Range
0 → 10 mA, 0 → 10V dc
Supply Voltage
10 → 30V dc
Mounting Type
DIN Rail Mount
Operating Temperature Range
0 → +50°C
Series
9100
Minimum Operating Temperature
0°C
Maximum Operating Temperature
+50°C
Termination
Screw
Izcelsmes valsts
United Kingdom
Produkta apraksts
24Vdc Trip Amplifiers, Signal Isolator/Converters
Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 250,00
Katrs (bez PVN)
€ 302,50
Katrs (Ieskaitot PVN)
1
€ 250,00
Katrs (bez PVN)
€ 302,50
Katrs (Ieskaitot PVN)
1
Tehniskie dokumenti
Specifikācija
Brand
RS ProModule Type
Signal Isolator
Input Signal Type
Current, Voltage
Output Signal Type
Current, Voltage
Input Range
0 → 20 mA, -250 → +250V dc
Output Range
0 → 10 mA, 0 → 10V dc
Supply Voltage
10 → 30V dc
Mounting Type
DIN Rail Mount
Operating Temperature Range
0 → +50°C
Series
9100
Minimum Operating Temperature
0°C
Maximum Operating Temperature
+50°C
Termination
Screw
Izcelsmes valsts
United Kingdom
Produkta apraksts
24Vdc Trip Amplifiers, Signal Isolator/Converters
Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation