RS PRO Black Plastic Sheet, 500mm x 300mm x 16mm
Tehniskie dokumenti
Specifikācija
Brand
RS ProColour
Black
Form
Full
Length
500mm
Width
300mm
Thickness
16mm
Material
PA
Laminated
No
Density
1.14g/cm³
Tensile Strength
75 MPa
Flammability Rating
UL 94 HB
Water Absorption
7%
Maximum Operating Temperature
+100°C
Elongation
25%
Izcelsmes valsts
Germany
Produkta apraksts
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 96,50
1 dala no 1 (bez PVN)
€ 116,76
1 dala no 1 (Ieskaitot PVN)
1
€ 96,50
1 dala no 1 (bez PVN)
€ 116,76
1 dala no 1 (Ieskaitot PVN)
1
Pirkt iepakojumos
| Daudzums | Vienības cena |
|---|---|
| 1 - 2 | € 96,50 |
| 3 - 9 | € 89,00 |
| 10 - 29 | € 84,00 |
| 30+ | € 76,50 |
Tehniskie dokumenti
Specifikācija
Brand
RS ProColour
Black
Form
Full
Length
500mm
Width
300mm
Thickness
16mm
Material
PA
Laminated
No
Density
1.14g/cm³
Tensile Strength
75 MPa
Flammability Rating
UL 94 HB
Water Absorption
7%
Maximum Operating Temperature
+100°C
Elongation
25%
Izcelsmes valsts
Germany
Produkta apraksts
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.