PR Electronics Signal Conditioner, Repeater power supply, Current, Voltage Input, Current, Voltage Output
Tehniskie dokumenti
Specifikācija
Brand
PR ElectronicsModule Type
Repeater power supply
Output Signal Type
Current, Voltage
Input Signal Type
Current, Voltage
Supply Voltage
19.2 → 300 V dc, 21.6 → 253V ac
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Series
5104A
Izcelsmes valsts
Denmark
Produkta apraksts
PR Electronics 5104A Repeater/ Power Supply
PR Electronics 5104A repeater is a power supply and signal isolator for 2-wire transmitters. The 5104A signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.
PR Electronics DIN Rail Mounting
€ 388,00
€ 388,00 Katrs (bez PVN)
€ 469,48
€ 469,48 Katrs (Ieskaitot PVN)
1
€ 388,00
€ 388,00 Katrs (bez PVN)
€ 469,48
€ 469,48 Katrs (Ieskaitot PVN)
1
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
Tehniskie dokumenti
Specifikācija
Brand
PR ElectronicsModule Type
Repeater power supply
Output Signal Type
Current, Voltage
Input Signal Type
Current, Voltage
Supply Voltage
19.2 → 300 V dc, 21.6 → 253V ac
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Series
5104A
Izcelsmes valsts
Denmark
Produkta apraksts
PR Electronics 5104A Repeater/ Power Supply
PR Electronics 5104A repeater is a power supply and signal isolator for 2-wire transmitters. The 5104A signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.