Parker Hydraulic End Sleeve TXS6

RS noliktavas nr.: 302-8152Ražotājs: ParkerRažotāja kods: TXS6
brand-logo
View all in Hydraulic Fitting Accessories

Tehniskie dokumenti

Specifikācija

Brand

Parker

Material

Steel

Produkta apraksts

End Sleeve

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.

Noliktavas stāvoklis patreiz nav pieejams

Lūdzu pārbaudiet vēlreiz vēlāk

Noliktavas stāvoklis patreiz nav pieejams

€ 0,861

Katrs (Paka ir 10) (bez PVN)

€ 1,042

Katrs (Paka ir 10) (Ieskaitot PVN)

Parker Hydraulic End Sleeve TXS6

10

Pieejams komplektos pa 10
10€ 8,61
20€ 17,22
30€ 25,83
40€ 34,44
50€ 43,05
60€ 51,66
70€ 60,27
80€ 68,88
90€ 77,49
100€ 86,10
110€ 94,71
120€ 103,32
130€ 111,93
140€ 120,54
150€ 129,15

€ 0,861

Katrs (Paka ir 10) (bez PVN)

€ 1,042

Katrs (Paka ir 10) (Ieskaitot PVN)

Parker Hydraulic End Sleeve TXS6
Noliktavas stāvoklis patreiz nav pieejams

10

Pieejams komplektos pa 10
10€ 8,61
20€ 17,22
30€ 25,83
40€ 34,44
50€ 43,05
60€ 51,66
70€ 60,27
80€ 68,88
90€ 77,49
100€ 86,10
110€ 94,71
120€ 103,32
130€ 111,93
140€ 120,54
150€ 129,15

Tehniskie dokumenti

Specifikācija

Brand

Parker

Material

Steel

Produkta apraksts

End Sleeve

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.