Parker Hydraulic Gear Pump, 23cm³
Tehniskie dokumenti
Specifikācija
Brand
ParkerDisplacement
23cm³
Maximum Operating Pressure
225 bar
Minimum Rotational Speed
500rpm
Manufacturer Series
PGP511
Direction of Rotation
Clockwise
Maximum Rotational Speed
1900rpm
Body Dimensions
154.3 x 89.5 x 114mm
Body Height
114mm
Body Length
154.3mm
Body Width
89.5mm
Izcelsmes valsts
Czech Republic
Produkta apraksts
Fixed Displacement Gear Pump, 1:8 Tapered Shaft
Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide.
Gear Pumps
Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 435,00
Katrs (bez PVN)
€ 526,35
Katrs (Ieskaitot PVN)
1
€ 435,00
Katrs (bez PVN)
€ 526,35
Katrs (Ieskaitot PVN)
1
Tehniskie dokumenti
Specifikācija
Brand
ParkerDisplacement
23cm³
Maximum Operating Pressure
225 bar
Minimum Rotational Speed
500rpm
Manufacturer Series
PGP511
Direction of Rotation
Clockwise
Maximum Rotational Speed
1900rpm
Body Dimensions
154.3 x 89.5 x 114mm
Body Height
114mm
Body Length
154.3mm
Body Width
89.5mm
Izcelsmes valsts
Czech Republic
Produkta apraksts
Fixed Displacement Gear Pump, 1:8 Tapered Shaft
Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide.
Gear Pumps
Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.