Nuvotem Talema 230V ac, 2 x 12V ac Toroidal Transformer, 80VA 2 Output
Tehniskie dokumenti
Specifikācija
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 12V ac
Power Rating
80VA
Number of Outputs
2
Secondary Current
3.33A
Height
38mm
Weight
900g
Diameter
93mm
Dimensions
93 (Dia.) x 38mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Isolation Voltage
4.5kV ac
Minimum Temperature
0°C
Maximum Temperature
+120°C
Produkta apraksts
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 59,50
Katrs (bez PVN)
€ 72,00
Katrs (Ieskaitot PVN)
1
€ 59,50
Katrs (bez PVN)
€ 72,00
Katrs (Ieskaitot PVN)
1
Pirkt iepakojumos
| Daudzums | Vienības cena |
|---|---|
| 1 - 9 | € 59,50 |
| 10 - 24 | € 56,00 |
| 25 - 49 | € 50,00 |
| 50 - 74 | € 44,30 |
| 75+ | € 38,40 |
Tehniskie dokumenti
Specifikācija
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 12V ac
Power Rating
80VA
Number of Outputs
2
Secondary Current
3.33A
Height
38mm
Weight
900g
Diameter
93mm
Dimensions
93 (Dia.) x 38mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Isolation Voltage
4.5kV ac
Minimum Temperature
0°C
Maximum Temperature
+120°C
Produkta apraksts
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558