Murata MGK Non-Isolated DC-DC Converter, 4.5 → 5.5 V dc Input, Surface Mount, +85°C Max Temp -40°C Min Temp
Tehniskie dokumenti
Specifikācija
Brand
MurataInput Voltage Range
4.5 → 5.5 V dc
Input Voltage Nominal
5 V dc
Mounting Type
Surface Mount
Number of Outputs
1
Series
MGK
Minimum Temperature
-40°C
Efficiency
89.2%
Maximum Temperature
+85°C
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
PRICED TO CLEAR
Yes
Produkta apraksts
Murata Mono Block 20A DC-DC Converter
The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 7,30
1 rullis no 400 (bez PVN)
€ 8,833
1 rullis no 400 (Ieskaitot PVN)
1
€ 7,30
1 rullis no 400 (bez PVN)
€ 8,833
1 rullis no 400 (Ieskaitot PVN)
1
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Tehniskie dokumenti
Specifikācija
Brand
MurataInput Voltage Range
4.5 → 5.5 V dc
Input Voltage Nominal
5 V dc
Mounting Type
Surface Mount
Number of Outputs
1
Series
MGK
Minimum Temperature
-40°C
Efficiency
89.2%
Maximum Temperature
+85°C
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
PRICED TO CLEAR
Yes
Produkta apraksts
Murata Mono Block 20A DC-DC Converter
The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products