MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

RS noliktavas nr.: 136-0780Ražotājs: MikroElektronikaRažotāja kods: MIKROE-2040
brand-logo
View all in LED izstrades riki

Tehniskie dokumenti

Specifikācija

Kit Classification

mikroBus Click Board

Featured Device

APDS-9960

Kit Name

Button G

Produkta apraksts

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards

Noliktavas stāvoklis patreiz nav pieejams

Lūdzu pārbaudiet vēlreiz vēlāk

Noliktavas stāvoklis patreiz nav pieejams

€ 12,30

Katrs (bez PVN)

€ 14,88

Katrs (Ieskaitot PVN)

MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

€ 12,30

Katrs (bez PVN)

€ 14,88

Katrs (Ieskaitot PVN)

MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960
Noliktavas stāvoklis patreiz nav pieejams

Tehniskie dokumenti

Specifikācija

Kit Classification

mikroBus Click Board

Featured Device

APDS-9960

Kit Name

Button G

Produkta apraksts

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards