Tehniskie dokumenti
Specifikācija
Brand
MicrochipNumber of Supervisors
1
Power Fail Detection
Yes
Output Driver
Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
10µs
Package Type
SOT-23
Pin Count
3
Dimensions
3.04 x 1.4 x 1.02mm
Maximum Monitored Voltage
3.15V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Minimum Monitored Voltage
3.07V
Produkta apraksts
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Supervisory & Reset Circuits - Microchip
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 0,613
Katrs (tiek piegadats Rulli) (bez PVN)
€ 0,742
Katrs (tiek piegadats Rulli) (Ieskaitot PVN)
10
€ 0,613
Katrs (tiek piegadats Rulli) (bez PVN)
€ 0,742
Katrs (tiek piegadats Rulli) (Ieskaitot PVN)
10
Pirkt iepakojumos
Daudzums | Vienības cena | Per Rullis |
---|---|---|
10 - 10 | € 0,613 | € 6,13 |
20 - 40 | € 0,595 | € 5,95 |
50 - 90 | € 0,571 | € 5,71 |
100+ | € 0,546 | € 5,46 |
Tehniskie dokumenti
Specifikācija
Brand
MicrochipNumber of Supervisors
1
Power Fail Detection
Yes
Output Driver
Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
10µs
Package Type
SOT-23
Pin Count
3
Dimensions
3.04 x 1.4 x 1.02mm
Maximum Monitored Voltage
3.15V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Minimum Monitored Voltage
3.07V
Produkta apraksts
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.