Tehniskie dokumenti
Specifikācija
Brand
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Through Hole
Maximum Reset Active Time
700ms
Package Type
TO-92
Pin Count
3
Dimensions
4.71 x 3.62 x 4.62mm
Maximum Monitored Voltage
4.5V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Monitored Voltage
4.37V
Minimum Operating Supply Voltage
1 V
Izcelsmes valsts
Taiwan, Province Of China
Produkta apraksts
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Supervisory & Reset Circuits - Microchip
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 0,653
Katrs (Paka ir 10) (bez PVN)
€ 0,79
Katrs (Paka ir 10) (Ieskaitot PVN)
10
€ 0,653
Katrs (Paka ir 10) (bez PVN)
€ 0,79
Katrs (Paka ir 10) (Ieskaitot PVN)
10
Pirkt iepakojumos
Daudzums | Vienības cena | Per Iepakojums |
---|---|---|
10 - 20 | € 0,653 | € 6,53 |
30 - 90 | € 0,613 | € 6,13 |
100+ | € 0,574 | € 5,74 |
Tehniskie dokumenti
Specifikācija
Brand
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Through Hole
Maximum Reset Active Time
700ms
Package Type
TO-92
Pin Count
3
Dimensions
4.71 x 3.62 x 4.62mm
Maximum Monitored Voltage
4.5V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Monitored Voltage
4.37V
Minimum Operating Supply Voltage
1 V
Izcelsmes valsts
Taiwan, Province Of China
Produkta apraksts
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.