Tehniskie dokumenti
Specifikācija
Brand
MicrochipMemory Size
8kbit
Interface Type
Serial
Package Type
SOT-23
Mounting Type
Surface Mount
Pin Count
3
Organisation
1K x 8 bit
Minimum Operating Supply Voltage
2.5 V
Maximum Operating Supply Voltage
5.5 V
Dimensions
2.9 x 1.3 x 0.95mm
Data Retention
200yr
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Produkta apraksts
11AAxxx/11LCxxx UNI/O™ Serial EEPROM
The Microchip 11AAxxx/11LCxxx family of devices are Serial EEPROMs featuring Microchips proprietary UNI/O™ Serial Bus.
UNI/O™ Serial EEPROM devices require only one connection to a host Microcontroller as clock and data communications are combined into a single serial bit stream. The result is that UNI/O™ devices require one Microcontroller I/O instead of the 2 to 6 (depending on configuration) that I2C, Microwire and SPI bus EEPROM devices require. To the designer this opens up the possibility of employing a smaller host MCU with fewer I/Os, reducing the MCU cost and allowing for a more compact design.
EEPROM Serial Access - Microchip
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 0,066
Katrs (Rulli ir 3000) (bez PVN)
€ 0,08
Katrs (Rulli ir 3000) (Ieskaitot PVN)
3000
€ 0,066
Katrs (Rulli ir 3000) (bez PVN)
€ 0,08
Katrs (Rulli ir 3000) (Ieskaitot PVN)
3000
Tehniskie dokumenti
Specifikācija
Brand
MicrochipMemory Size
8kbit
Interface Type
Serial
Package Type
SOT-23
Mounting Type
Surface Mount
Pin Count
3
Organisation
1K x 8 bit
Minimum Operating Supply Voltage
2.5 V
Maximum Operating Supply Voltage
5.5 V
Dimensions
2.9 x 1.3 x 0.95mm
Data Retention
200yr
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Produkta apraksts
11AAxxx/11LCxxx UNI/O™ Serial EEPROM
The Microchip 11AAxxx/11LCxxx family of devices are Serial EEPROMs featuring Microchips proprietary UNI/O™ Serial Bus.
UNI/O™ Serial EEPROM devices require only one connection to a host Microcontroller as clock and data communications are combined into a single serial bit stream. The result is that UNI/O™ devices require one Microcontroller I/O instead of the 2 to 6 (depending on configuration) that I2C, Microwire and SPI bus EEPROM devices require. To the designer this opens up the possibility of employing a smaller host MCU with fewer I/Os, reducing the MCU cost and allowing for a more compact design.