Megger MFT1721 Multifunction Tester, 100V , Earth Resistance Measurement With Wireless RS Calibration
Tehniskie dokumenti
Specifikācija
Brand
MeggerCalibrated
RSCAL
Loop Impedance Test Type
2 Wire, 3 Wire
Automatic RCD Test
Yes
RCD Ramp Test
Yes
Model Number p
MFT1721
Non-Tripping
Yes
Insulation Test Voltage
100 V, 250 V, 500 V, 1000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
Yes
Interface Type
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, B, S
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
IP Rating
IP54
Dimensions
85 x 235 x 150mm
Safety Category
CAT III 600 V, CAT IV 300 V
Display Type
LCD
Maximum Operating Temperature
+55°C
Battery Type
AA Alkaline
Safety Category Voltage
300 V, 600 V
Voltage Measurement Range
10 → 600V
Width
235mm
Power Source
Battery
Length
85mm
Minimum Continuity Resistance
0.01Ω
Continuity Range
0.01 → 99.9 kΩ
Safety Category Level
CAT III, CAT IV
Weight
1 (with Battery; Excluding Case)kg
Maximum Continuity Resistance
99.9kΩ
Plug Type
BS 1363, LT 300-EN-BS
Height
150mm
Minimum Operating Temperature
-10°C
Operating Temperature Range
-10 → +55 °C
Izcelsmes valsts
United Kingdom
Produkta apraksts
Megger MFT1721 Multifunction Tester
The MFT1721 is part of the MFT1701 series from Megger whcih tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial, and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The MFT1721 includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited, and a warning beep sounds.
Supplied with
MFT1721 - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case
€ 2 430,00
€ 2 430,00 Katrs (bez PVN)
€ 2 940,30
€ 2 940,30 Katrs (Ieskaitot PVN)
Kalibrācijas veids
RS kalibrācija
1
€ 2 430,00
€ 2 430,00 Katrs (bez PVN)
€ 2 940,30
€ 2 940,30 Katrs (Ieskaitot PVN)
Kalibrācijas veids
RS kalibrācija
1
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
Tehniskie dokumenti
Specifikācija
Brand
MeggerCalibrated
RSCAL
Loop Impedance Test Type
2 Wire, 3 Wire
Automatic RCD Test
Yes
RCD Ramp Test
Yes
Model Number p
MFT1721
Non-Tripping
Yes
Insulation Test Voltage
100 V, 250 V, 500 V, 1000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
Yes
Interface Type
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, B, S
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
IP Rating
IP54
Dimensions
85 x 235 x 150mm
Safety Category
CAT III 600 V, CAT IV 300 V
Display Type
LCD
Maximum Operating Temperature
+55°C
Battery Type
AA Alkaline
Safety Category Voltage
300 V, 600 V
Voltage Measurement Range
10 → 600V
Width
235mm
Power Source
Battery
Length
85mm
Minimum Continuity Resistance
0.01Ω
Continuity Range
0.01 → 99.9 kΩ
Safety Category Level
CAT III, CAT IV
Weight
1 (with Battery; Excluding Case)kg
Maximum Continuity Resistance
99.9kΩ
Plug Type
BS 1363, LT 300-EN-BS
Height
150mm
Minimum Operating Temperature
-10°C
Operating Temperature Range
-10 → +55 °C
Izcelsmes valsts
United Kingdom
Produkta apraksts
Megger MFT1721 Multifunction Tester
The MFT1721 is part of the MFT1701 series from Megger whcih tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial, and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The MFT1721 includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited, and a warning beep sounds.
Supplied with
MFT1721 - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case