KEMET Ferrite Flat Cable Ferrite, Solid Core, Inner dims. 23.5 x 1.5mm
Tehniskie dokumenti
Specifikācija
Brand
KEMETType
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
28 x 7 x 7.7mm
Inner Dimensions
23.5 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
23.5mm
Outer Depth
7mm
Outer Height
7.7mm
Outer Width
28mm
Produkta apraksts
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 0,861
Katrs (tiek piegadats Kaste) (bez PVN)
€ 1,042
Katrs (tiek piegadats Kaste) (Ieskaitot PVN)
Industriālais iepakojums (Kaste)
50
€ 0,861
Katrs (tiek piegadats Kaste) (bez PVN)
€ 1,042
Katrs (tiek piegadats Kaste) (Ieskaitot PVN)
Industriālais iepakojums (Kaste)
50
Pirkt iepakojumos
| Daudzums | Vienības cena | Per Kaste |
|---|---|---|
| 50 - 95 | € 0,861 | € 4,30 |
| 100 - 245 | € 0,809 | € 4,04 |
| 250 - 495 | € 0,738 | € 3,69 |
| 500+ | € 0,672 | € 3,36 |
Tehniskie dokumenti
Specifikācija
Brand
KEMETType
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
28 x 7 x 7.7mm
Inner Dimensions
23.5 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
23.5mm
Outer Depth
7mm
Outer Height
7.7mm
Outer Width
28mm
Produkta apraksts
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.