ITT Cannon TSTRECT Series Nylon D Sub Backshell, 6 Way, Strain Relief
Tehniskie dokumenti
Specifikācija
Produkta apraksts
Hood (for cable shell type A)
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 4,20
Katrs (Paka ir 5) (bez PVN)
€ 5,082
Katrs (Paka ir 5) (Ieskaitot PVN)
5
€ 4,20
Katrs (Paka ir 5) (bez PVN)
€ 5,082
Katrs (Paka ir 5) (Ieskaitot PVN)
5
Pirkt iepakojumos
| Daudzums | Vienības cena | Per Iepakojums |
|---|---|---|
| 5 - 95 | € 4,20 | € 21,00 |
| 100 - 195 | € 3,75 | € 18,75 |
| 200+ | € 3,30 | € 16,50 |
Tehniskie dokumenti
Specifikācija
Produkta apraksts
Hood (for cable shell type A)
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)