INA HFL0822-L564 Sprag Clutch Bearing 8mm I.D., 12mm O.D., 22mm Race Width
Tehniskie dokumenti
Specifikācija
Brand
INAInside Diameter
8mm
Outside Diameter
12mm
Race Width
22mm
Dynamic Load Rating
3650N
Static Load Rating
3950N
Izcelsmes valsts
Germany
Produkta apraksts
Drawn Cup Roller Clutches
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are compact in a radial direction.
Drawn cup roller clutches give precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps. They allow high indexing frequencies due to their low mass and the resulting low moment of inertia of the clamping elements. They also have a low overrunning frictional torque.
INA
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 30,70
Katrs (bez PVN)
€ 37,15
Katrs (Ieskaitot PVN)
1
€ 30,70
Katrs (bez PVN)
€ 37,15
Katrs (Ieskaitot PVN)
1
Pirkt iepakojumos
| Daudzums | Vienības cena |
|---|---|
| 1 - 4 | € 30,70 |
| 5 - 9 | € 29,40 |
| 10 - 24 | € 27,80 |
| 25+ | € 27,20 |
Tehniskie dokumenti
Specifikācija
Brand
INAInside Diameter
8mm
Outside Diameter
12mm
Race Width
22mm
Dynamic Load Rating
3650N
Static Load Rating
3950N
Izcelsmes valsts
Germany
Produkta apraksts
Drawn Cup Roller Clutches
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are compact in a radial direction.
Drawn cup roller clutches give precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps. They allow high indexing frequencies due to their low mass and the resulting low moment of inertia of the clamping elements. They also have a low overrunning frictional torque.