HellermannTyton WIC2 Snap On Cable Markers, Violet, Pre-printed ""7"", 2.8 → 3.8mm Cable
Tehniskie dokumenti
Specifikācija
Brand
HellermannTytonAffixing Method
Snap On
Legend
7
Minimum Cable Diameter
2.8mm
Maximum Cable Diameter
3.8mm
Colour
Violet
Length
3mm
Width
5.6 mm
Quantity
200
Printable
No
Material
Polyamide
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Cable Diameter Range
2.8 → 3.8mm
Resistant To
Vibrations
Series
WIC2
Operating Temperature Range
-40 → +85 °C
Izcelsmes valsts
United Kingdom
Produkta apraksts
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 13,00
1 iepakojums no 200 (bez PVN)
€ 15,73
1 iepakojums no 200 (Ieskaitot PVN)
1
€ 13,00
1 iepakojums no 200 (bez PVN)
€ 15,73
1 iepakojums no 200 (Ieskaitot PVN)
1
Pirkt iepakojumos
| Daudzums | Vienības cena |
|---|---|
| 1 - 14 | € 13,00 |
| 15 - 49 | € 12,40 |
| 50+ | € 11,70 |
Tehniskie dokumenti
Specifikācija
Brand
HellermannTytonAffixing Method
Snap On
Legend
7
Minimum Cable Diameter
2.8mm
Maximum Cable Diameter
3.8mm
Colour
Violet
Length
3mm
Width
5.6 mm
Quantity
200
Printable
No
Material
Polyamide
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Cable Diameter Range
2.8 → 3.8mm
Resistant To
Vibrations
Series
WIC2
Operating Temperature Range
-40 → +85 °C
Izcelsmes valsts
United Kingdom
Produkta apraksts
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.