Tehniskie dokumenti
Specifikācija
Brand
FestoStroke
25mm
Bore
63mm
Manufacturer Series
DFM
Action
Double
Maximum Operating Pressure
10 bar
Cushioning Type
Elastomer
Model Number p
170953
Dimensions
118 x 162 x 78mm
Weight
4.5kg
Maximum Operating Temperature
+60°C
Length
118mm
Height
78mm
Minimum Operating Temperature
-5°C
Width
162mm
Izcelsmes valsts
Germany
Produkta apraksts
DFM Pneumatic Guided Cylinders - Ball Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Recirculating ball bearings drive the guide rods making it ideal for applications where torque loads are present. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 740,00
Katrs (bez PVN)
€ 895,40
Katrs (Ieskaitot PVN)
1
€ 740,00
Katrs (bez PVN)
€ 895,40
Katrs (Ieskaitot PVN)
1
Tehniskie dokumenti
Specifikācija
Brand
FestoStroke
25mm
Bore
63mm
Manufacturer Series
DFM
Action
Double
Maximum Operating Pressure
10 bar
Cushioning Type
Elastomer
Model Number p
170953
Dimensions
118 x 162 x 78mm
Weight
4.5kg
Maximum Operating Temperature
+60°C
Length
118mm
Height
78mm
Minimum Operating Temperature
-5°C
Width
162mm
Izcelsmes valsts
Germany
Produkta apraksts
DFM Pneumatic Guided Cylinders - Ball Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Recirculating ball bearings drive the guide rods making it ideal for applications where torque loads are present. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.