Tehniskie dokumenti
Specifikācija
Brand
EntrelecColour
Grey
Number of Levels
Single
Series
ZK2.5
Termination Method
Spring Clamp
Cable CSA
2.5mm²
Fused
Yes
Voltage Rating
500 V
Current Rating
16A
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+110°C
Izcelsmes valsts
France
Produkta apraksts
ZK2.5 PI-Spring Feed-Through Terminal Blocks
ZK2.5 PI-Spring feed-through Terminal Blocks combine high performance with compact dimensions. The terminals are also the best for marking, with an up-front flat marker zone. This feature lets you mark up to eight digits or increase the font size.
SNK Series PI-Spring Terminal Blocks
PI-Spring technology provides a Smart Connection and the benefits of 2 technologies in 1 connection:
1. 50% faster connection time with Push-In mode (direct insertion - for stranded wire with ferrule or for solid wire, use screwdriver to remove wire).
2. Reduced effort and conductor preparation time with Spring-Mode (use screwdriver to insert and remove non-prepared stranded wires).
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 9,00
Katrs (Paka ir 5) (bez PVN)
€ 10,89
Katrs (Paka ir 5) (Ieskaitot PVN)
5
€ 9,00
Katrs (Paka ir 5) (bez PVN)
€ 10,89
Katrs (Paka ir 5) (Ieskaitot PVN)
5
Tehniskie dokumenti
Specifikācija
Brand
EntrelecColour
Grey
Number of Levels
Single
Series
ZK2.5
Termination Method
Spring Clamp
Cable CSA
2.5mm²
Fused
Yes
Voltage Rating
500 V
Current Rating
16A
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+110°C
Izcelsmes valsts
France
Produkta apraksts
ZK2.5 PI-Spring Feed-Through Terminal Blocks
ZK2.5 PI-Spring feed-through Terminal Blocks combine high performance with compact dimensions. The terminals are also the best for marking, with an up-front flat marker zone. This feature lets you mark up to eight digits or increase the font size.
SNK Series PI-Spring Terminal Blocks
PI-Spring technology provides a Smart Connection and the benefits of 2 technologies in 1 connection:
1. 50% faster connection time with Push-In mode (direct insertion - for stranded wire with ferrule or for solid wire, use screwdriver to remove wire).
2. Reduced effort and conductor preparation time with Spring-Mode (use screwdriver to insert and remove non-prepared stranded wires).