Crouzet Phase, Voltage Monitoring Relay, 3 Phase, SPDT, 183 → 528V ac, DIN Rail
Tehniskie dokumenti
Specifikācija
Brand
CrouzetMonitoring Application
Phase, Voltage
Electrical Phase
3
Voltage Sensing Range
183 → 528V ac
Contact Configuration
SPDT
Voltage Sensitivity
Overvoltage, Undervoltage
Mounting Type
DIN Rail
Phase Sensitivity
Phase Failure, Phase Imbalance, Phase Sequence
Time Delay
0.1 → 10s
Series
MWUA
Dimensions
69 x 17.5 x 92.6mm
Operating Temperature Range
+50°C
Minimum Operating Temperature
-20°C
Width
17.5mm
Maximum Operating Temperature
+50°C
Maximum Voltage Sensed
528V ac
Length
69mm
Minimum Voltage Sensed
183V ac
Height
92.6mm
Produkta apraksts
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.
€ 206,00
€ 206,00 Katrs (bez PVN)
€ 249,26
€ 249,26 Katrs (Ieskaitot PVN)
1
€ 206,00
€ 206,00 Katrs (bez PVN)
€ 249,26
€ 249,26 Katrs (Ieskaitot PVN)
1
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
Tehniskie dokumenti
Specifikācija
Brand
CrouzetMonitoring Application
Phase, Voltage
Electrical Phase
3
Voltage Sensing Range
183 → 528V ac
Contact Configuration
SPDT
Voltage Sensitivity
Overvoltage, Undervoltage
Mounting Type
DIN Rail
Phase Sensitivity
Phase Failure, Phase Imbalance, Phase Sequence
Time Delay
0.1 → 10s
Series
MWUA
Dimensions
69 x 17.5 x 92.6mm
Operating Temperature Range
+50°C
Minimum Operating Temperature
-20°C
Width
17.5mm
Maximum Operating Temperature
+50°C
Maximum Voltage Sensed
528V ac
Length
69mm
Minimum Voltage Sensed
183V ac
Height
92.6mm
Produkta apraksts
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.