HCPL-7800-300E Broadcom, Isolation Amplifier, 5 V, 8-Pin PDIP SMD
Tehniskie dokumenti
Specifikācija
Brand
BroadcomPower Supply Type
Single
Typical Single Supply Voltage
5 V
Isolation Mode Rejection
76dB
Number of Channels per Chip
1
Maximum Voltage Gain
18.31dB
Mounting Type
Surface Mount
Package Type
PDIP SMD
Pin Count
8
Dimensions
3.56 x 9.8 x 6.35mm
Height
3.56mm
Width
6.35mm
Length
9.8mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Produkta apraksts
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 8,60
Katrs (Tubina ir 50) (bez PVN)
€ 10,406
Katrs (Tubina ir 50) (Ieskaitot PVN)
50
€ 8,60
Katrs (Tubina ir 50) (bez PVN)
€ 10,406
Katrs (Tubina ir 50) (Ieskaitot PVN)
50
Pirkt iepakojumos
| Daudzums | Vienības cena | Per Penālis |
|---|---|---|
| 50 - 200 | € 8,60 | € 430,00 |
| 250 - 450 | € 7,50 | € 375,00 |
| 500+ | € 6,60 | € 330,00 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Tehniskie dokumenti
Specifikācija
Brand
BroadcomPower Supply Type
Single
Typical Single Supply Voltage
5 V
Isolation Mode Rejection
76dB
Number of Channels per Chip
1
Maximum Voltage Gain
18.31dB
Mounting Type
Surface Mount
Package Type
PDIP SMD
Pin Count
8
Dimensions
3.56 x 9.8 x 6.35mm
Height
3.56mm
Width
6.35mm
Length
9.8mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Produkta apraksts
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products