Ametek EN757 Series Regenerative Centrifugal Fan, 230 V ac, 460 V ac, 517.39m³/h, AC Operation, 425.5 x 443 x 553.4mm
Tehniskie dokumenti
Specifikācija
Brand
AmetekSupply Voltage
230 V ac, 460 V ac
Blower Type
Regenerative
AC or DC Operation
AC
Air Flow
517.39m³/h
Series
EN757
Height
443mm
Width
425.5mm
Depth
553.4mm
Dimensions
425.5 x 443 x 553.4mm
Bearing Type
Ball
Direction of Curve
Forward
Maximum Current
7.5 A, 15A
Horizontal Hole Spacing
142.2 mm, 389.9mm
Termination Type
Terminal
Special Features
Quiet Operation within OSHA Standards, UL & CSA Approved Motor with Permanently Sealed Ball Bearings for Explosive Gas Atmospheres Class I Group D Minimum
Outlet Diameter
63.5mm
Inlet Diameter
63.5mm
Mounting Hole Diameter
16mm
Produkta apraksts
Ametek Environmental Regenerative Blower
Professional range of Ametek industrial regenerative blowers that provide quiet, maintenance free, oil free operations. Air and other gases are drawn into the blower via the inlet ports on the impeller blades.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 8 670,00
Katrs (bez PVN)
€ 10 490,70
Katrs (Ieskaitot PVN)
1
€ 8 670,00
Katrs (bez PVN)
€ 10 490,70
Katrs (Ieskaitot PVN)
1
Tehniskie dokumenti
Specifikācija
Brand
AmetekSupply Voltage
230 V ac, 460 V ac
Blower Type
Regenerative
AC or DC Operation
AC
Air Flow
517.39m³/h
Series
EN757
Height
443mm
Width
425.5mm
Depth
553.4mm
Dimensions
425.5 x 443 x 553.4mm
Bearing Type
Ball
Direction of Curve
Forward
Maximum Current
7.5 A, 15A
Horizontal Hole Spacing
142.2 mm, 389.9mm
Termination Type
Terminal
Special Features
Quiet Operation within OSHA Standards, UL & CSA Approved Motor with Permanently Sealed Ball Bearings for Explosive Gas Atmospheres Class I Group D Minimum
Outlet Diameter
63.5mm
Inlet Diameter
63.5mm
Mounting Hole Diameter
16mm
Produkta apraksts
Ametek Environmental Regenerative Blower
Professional range of Ametek industrial regenerative blowers that provide quiet, maintenance free, oil free operations. Air and other gases are drawn into the blower via the inlet ports on the impeller blades.