RS PRO Test Pin 3A
Tehniskie dokumenti
Specifikācija
Brand
RS ProCurrent Rating
3A
Probe Tip Type
Needle
Probe Socket Diameter
24.7mm
Distrelec Product Id
30403297
Izcelsmes valsts
China
Produkta apraksts
RS Pro Spring Probe with Needle Point Head
Brought to you under the trusted RS Pro Brand, this flat head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The needle head is ideal for test lands, pads, leads and holes. Penetrates oxides and fluxes as well as contaminated boards.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 3,25
Katrs (Paka ir 5) (bez PVN)
€ 3,932
Katrs (Paka ir 5) (Ieskaitot PVN)
5
€ 3,25
Katrs (Paka ir 5) (bez PVN)
€ 3,932
Katrs (Paka ir 5) (Ieskaitot PVN)
5
Pirkt iepakojumos
| Daudzums | Vienības cena | Per Iepakojums |
|---|---|---|
| 5 - 20 | € 3,25 | € 16,25 |
| 25 - 45 | € 3,00 | € 15,00 |
| 50 - 95 | € 2,75 | € 13,75 |
| 100+ | € 2,50 | € 12,50 |
Tehniskie dokumenti
Specifikācija
Brand
RS ProCurrent Rating
3A
Probe Tip Type
Needle
Probe Socket Diameter
24.7mm
Distrelec Product Id
30403297
Izcelsmes valsts
China
Produkta apraksts
RS Pro Spring Probe with Needle Point Head
Brought to you under the trusted RS Pro Brand, this flat head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The needle head is ideal for test lands, pads, leads and holes. Penetrates oxides and fluxes as well as contaminated boards.