Murrelektronik Limited EMPARRO Switched Mode DIN Rail Power Supply, 230V ac, 24V dc dc Output, 20A Output, 480W

RS noliktavas nr.: 123-6697Ražotājs: Murrelektronik LimitedRažotāja kods: 85442
brand-logo
Skatīt visu DIN sliedes barošanas bloki

Tehniskie dokumenti

Specifikācija

Series

EMPARRO

Type

Switched Mode

Electrical Phase

1

Number of Outputs

1

Input Voltage

230V ac

AC or DC Output Voltage

dc

Output Voltage

24V dc

Output Current

20A

Power Rating

480W

Dimensions

123 x 85 x 138mm

Width

85mm

Depth

138mm

Height

123mm

Minimum Temperature

-25°C

Ripple And Noise

50mV ac

MTBF

>500000h

Mounting Type

DIN Rail Mount

Output Voltage Adjustment Range

24 → 28V

Special Features

Efficient, Reliable, Rugged

Maximum Temperature

+60°C

Standards Met

cULus, cULus Recognised, DNC, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, GL, SEMI F47

Izcelsmes valsts

Czech Republic

Produkta apraksts

Emparro Power Supply 1 and 3 Phase

Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.

Switch Mode - Murrelektronik

Noliktavas stāvoklis patreiz nav pieejams

Lūdzu pārbaudiet vēlreiz vēlāk

Noliktavas stāvoklis patreiz nav pieejams

€ 385,00

€ 385,00 Katrs (bez PVN)

€ 465,85

€ 465,85 Katrs (Ieskaitot PVN)

Murrelektronik Limited EMPARRO Switched Mode DIN Rail Power Supply, 230V ac, 24V dc dc Output, 20A Output, 480W

€ 385,00

€ 385,00 Katrs (bez PVN)

€ 465,85

€ 465,85 Katrs (Ieskaitot PVN)

Murrelektronik Limited EMPARRO Switched Mode DIN Rail Power Supply, 230V ac, 24V dc dc Output, 20A Output, 480W
Noliktavas stāvoklis patreiz nav pieejams

Tehniskie dokumenti

Specifikācija

Series

EMPARRO

Type

Switched Mode

Electrical Phase

1

Number of Outputs

1

Input Voltage

230V ac

AC or DC Output Voltage

dc

Output Voltage

24V dc

Output Current

20A

Power Rating

480W

Dimensions

123 x 85 x 138mm

Width

85mm

Depth

138mm

Height

123mm

Minimum Temperature

-25°C

Ripple And Noise

50mV ac

MTBF

>500000h

Mounting Type

DIN Rail Mount

Output Voltage Adjustment Range

24 → 28V

Special Features

Efficient, Reliable, Rugged

Maximum Temperature

+60°C

Standards Met

cULus, cULus Recognised, DNC, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, GL, SEMI F47

Izcelsmes valsts

Czech Republic

Produkta apraksts

Emparro Power Supply 1 and 3 Phase

Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.

Switch Mode - Murrelektronik