Tehniskie dokumenti
Specifikācija
Brand
KEMETMaximum Number of Wires
13
Type
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
23.8 x 15 x 6.3mm
Inner Dimensions
18.8 x 1.1mm
Inner Height
1.1mm
Inner Width
18.8mm
Outer Depth
15mm
Outer Height
6.3mm
Outer Width
23.8mm
Produkta apraksts
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 0,693
Katrs (tiek piegadats Kaste) (bez PVN)
€ 0,839
Katrs (tiek piegadats Kaste) (Ieskaitot PVN)
Industriālais iepakojums (Kaste)
5
€ 0,693
Katrs (tiek piegadats Kaste) (bez PVN)
€ 0,839
Katrs (tiek piegadats Kaste) (Ieskaitot PVN)
Industriālais iepakojums (Kaste)
5
Pirkt iepakojumos
Daudzums | Vienības cena | Per Kaste |
---|---|---|
5 - 45 | € 0,693 | € 3,46 |
50 - 120 | € 0,479 | € 2,40 |
125 - 245 | € 0,465 | € 2,32 |
250 - 835 | € 0,455 | € 2,28 |
840+ | € 0,442 | € 2,21 |
Tehniskie dokumenti
Specifikācija
Brand
KEMETMaximum Number of Wires
13
Type
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
23.8 x 15 x 6.3mm
Inner Dimensions
18.8 x 1.1mm
Inner Height
1.1mm
Inner Width
18.8mm
Outer Depth
15mm
Outer Height
6.3mm
Outer Width
23.8mm
Produkta apraksts
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.