Diodes Inc Fixed Shunt Voltage Reference 3V ±1.0 % 3-Pin SOT-23, LM4040D30FTA

RS noliktavas nr.: 165-8407Ražotājs: DiodesZetexRažotāja kods: LM4040D30FTAIMPA: 0
brand-logo
View all in Balstspriegumi

Tehniskie dokumenti

Specifikācija

Reference Type

Fixed

Pin Count

3

Minimum Operating Temperature

-40 °C

Mounting Type

Surface Mount

Topology

Shunt

Maximum Operating Temperature

+125 °C

Nominal Voltage

3V

Initial Accuracy

±1.0 %

Width

1.4mm

Height

1.02mm

Maximum Output Current

15mA

Length

3.04mm

Package Type

SOT-23

Dimensions

3.04 x 1.4 x 1.02mm

Izcelsmes valsts

China

Produkta apraksts

Tubular

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Noliktavas stāvoklis patreiz nav pieejams

Lūdzu pārbaudiet vēlreiz vēlāk

Noliktavas stāvoklis patreiz nav pieejams

€ 0,228

Katrs (Rulli ir 3000) (bez PVN)

€ 0,276

Katrs (Rulli ir 3000) (Ieskaitot PVN)

Diodes Inc Fixed Shunt Voltage Reference 3V ±1.0 % 3-Pin SOT-23, LM4040D30FTA

€ 0,228

Katrs (Rulli ir 3000) (bez PVN)

€ 0,276

Katrs (Rulli ir 3000) (Ieskaitot PVN)

Diodes Inc Fixed Shunt Voltage Reference 3V ±1.0 % 3-Pin SOT-23, LM4040D30FTA
Noliktavas stāvoklis patreiz nav pieejams

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Tehniskie dokumenti

Specifikācija

Reference Type

Fixed

Pin Count

3

Minimum Operating Temperature

-40 °C

Mounting Type

Surface Mount

Topology

Shunt

Maximum Operating Temperature

+125 °C

Nominal Voltage

3V

Initial Accuracy

±1.0 %

Width

1.4mm

Height

1.02mm

Maximum Output Current

15mA

Length

3.04mm

Package Type

SOT-23

Dimensions

3.04 x 1.4 x 1.02mm

Izcelsmes valsts

China

Produkta apraksts

Tubular

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more