Allen Bradley Guardmaster 440N Series Magnetic Non-Contact Safety Switch, 250 V ac, 300V dc, Plastic Housing, NO/NC, 3m
Tehniskie dokumenti
Specifikācija
Supply Voltage
250 V ac, 300V dc
Safety Contacts
NO/NC
Housing Material
Plastic
Connection Type
3m Cable
Actuator Type
Magnetic
Auxiliary Contacts
NC
Safety Category
3
Sensor Principle
Magnetic
Actuator Included
Yes
Range
Sipha
Series
440N
Switching Distance
11mm
IP Rating
IP67
Depth
12mm
Width
25mm
Length
48mm
Izcelsmes valsts
Dominican Republic
Produkta apraksts
Allen-Bradley Sipha S1 Non-contact Safety Switch
The Sipha S1 is a non-contact switch in a miniature ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit.
Supplied with
Stock nos. 334-0761 & 335-5741 have a 3m cable attached, stock no. 873-2216 has a 10m cable attached.
Approvals
UL, CSA.
Standards
EN1088, EN292, EN60204-1.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 116,00
Katrs (bez PVN)
€ 140,36
Katrs (Ieskaitot PVN)
1
€ 116,00
Katrs (bez PVN)
€ 140,36
Katrs (Ieskaitot PVN)
1
Tehniskie dokumenti
Specifikācija
Supply Voltage
250 V ac, 300V dc
Safety Contacts
NO/NC
Housing Material
Plastic
Connection Type
3m Cable
Actuator Type
Magnetic
Auxiliary Contacts
NC
Safety Category
3
Sensor Principle
Magnetic
Actuator Included
Yes
Range
Sipha
Series
440N
Switching Distance
11mm
IP Rating
IP67
Depth
12mm
Width
25mm
Length
48mm
Izcelsmes valsts
Dominican Republic
Produkta apraksts
Allen-Bradley Sipha S1 Non-contact Safety Switch
The Sipha S1 is a non-contact switch in a miniature ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit.
Supplied with
Stock nos. 334-0761 & 335-5741 have a 3m cable attached, stock no. 873-2216 has a 10m cable attached.
Approvals
UL, CSA.
Standards
EN1088, EN292, EN60204-1.