Tehniskie dokumenti
Specifikācija
Brand
ADAFRUIT INDUSTRIESDiagonal Display Size
2.4in
Display Technology
Resistive Touch Screen
Kit Classification
Display Module
Kit Name
TFT LCD Display
For Use With
MicroSD Socket - ILI9341
Technology
TFT Display
Classification
LCD Touchscreen
Izcelsmes valsts
United States
Produkta apraksts
Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.4 TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.
Adafruit LCD Touchscreens
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 39,30
Katrs (bez PVN)
€ 47,55
Katrs (Ieskaitot PVN)
1
€ 39,30
Katrs (bez PVN)
€ 47,55
Katrs (Ieskaitot PVN)
1
Pirkt iepakojumos
Daudzums | Vienības cena |
---|---|
1 - 4 | € 39,30 |
5 - 9 | € 35,40 |
10+ | € 30,80 |
Tehniskie dokumenti
Specifikācija
Brand
ADAFRUIT INDUSTRIESDiagonal Display Size
2.4in
Display Technology
Resistive Touch Screen
Kit Classification
Display Module
Kit Name
TFT LCD Display
For Use With
MicroSD Socket - ILI9341
Technology
TFT Display
Classification
LCD Touchscreen
Izcelsmes valsts
United States
Produkta apraksts
Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.4 TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.