Schaffner 4A, 250 V ac Male Panel Mount IEC Inlet Filter FN9260-4-06, Faston 2 Fuse
Tehniskie dokumenti
Specifikācija
Brand
SchaffnerGender
Male
Number of Fuses
2
Fuse Size
5 x 20mm
Switch Type
None
Termination Method
Faston
Current Rating
4A
Voltage Rating
250 V ac
Mounting Type
Panel Mount
Operating Frequency
0 → 400Hz
IEC Connector Type
C14
Width
35mm
Depth
60.3mm
Height
46mm
Produkta apraksts
Double Fused FN9260
The FN9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution.
Can be used in a wide range of applications such as portable electrical & electronic equipment, medical equipment, household equipment, single-phase power supplies, switch-mode power supplies and test & measurement equipment.
Warning
Neutral line must not be fused where it is referenced to earth.
Approvals
UL recognised component, CSA certified, VDE
Schaffner Type FN Fused/Fused and Switched
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724). Accept 20 x 5mm dia. fuses. Fuses not included.
€ 684,00
€ 11,40 Katrs (Kaste ir 60) (bez PVN)
€ 827,64
€ 13,794 Katrs (Kaste ir 60) (Ieskaitot PVN)
60
€ 684,00
€ 11,40 Katrs (Kaste ir 60) (bez PVN)
€ 827,64
€ 13,794 Katrs (Kaste ir 60) (Ieskaitot PVN)
Noliktavas stāvoklis patreiz nav pieejams
60
Noliktavas stāvoklis patreiz nav pieejams
Tehniskie dokumenti
Specifikācija
Brand
SchaffnerGender
Male
Number of Fuses
2
Fuse Size
5 x 20mm
Switch Type
None
Termination Method
Faston
Current Rating
4A
Voltage Rating
250 V ac
Mounting Type
Panel Mount
Operating Frequency
0 → 400Hz
IEC Connector Type
C14
Width
35mm
Depth
60.3mm
Height
46mm
Produkta apraksts
Double Fused FN9260
The FN9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution.
Can be used in a wide range of applications such as portable electrical & electronic equipment, medical equipment, household equipment, single-phase power supplies, switch-mode power supplies and test & measurement equipment.
Warning
Neutral line must not be fused where it is referenced to earth.
Approvals
UL recognised component, CSA certified, VDE
Schaffner Type FN Fused/Fused and Switched
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724). Accept 20 x 5mm dia. fuses. Fuses not included.