Pepperl + Fuchs PLC Power Supply, 20 → 30 V dc, 24V dc, 4 A 20 x 119 x 115 mm
Tehniskie dokumenti
Specifikācija
Produkta apraksts
Power Module
The power supply module supplies 24Vdc to the power rail with a 4A maximum current.,The presence of the nominal power supply is signalled by a green LED (power ON) on the front panel. Errors are displayed by the illumination of the red LED on the front panel. The mode of operation is set by jumper.,The unit should not be operated during down time because the signal fuse can be blown. Therefore, it should always be run with K-Series components attached. The breakdown diodes between terminals (8 and 11) and (9 and 1) ensure transient over-voltage in accordance with IEC 801-5.
P.O.A.
1
P.O.A.
1
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
Tehniskie dokumenti
Specifikācija
Produkta apraksts
Power Module
The power supply module supplies 24Vdc to the power rail with a 4A maximum current.,The presence of the nominal power supply is signalled by a green LED (power ON) on the front panel. Errors are displayed by the illumination of the red LED on the front panel. The mode of operation is set by jumper.,The unit should not be operated during down time because the signal fuse can be blown. Therefore, it should always be run with K-Series components attached. The breakdown diodes between terminals (8 and 11) and (9 and 1) ensure transient over-voltage in accordance with IEC 801-5.