bez PVN
ar PVN
Tehniskie Dokumenti
Specifikācija
Brand
Nuvotem TalemaProduct Type
Toroidal Transformer
Primary Voltage
230 V ac
Secondary Voltage
2 x 18 V ac
Number of Outputs
2
Secondary Current
420mA
Weight
300g
Power
15VA
Diameter
60mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
450Hz
Minimum Operating Temperature
0°C
Maximum Operating Temperature
180°C
Termination Type
Copper Conductor Termination Wire
Height
31mm
Standards/Approvals
UL5, UL506, VDE0550, EN60065, BS415, EN61558
Produkta Apraksts
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
UL 506; EN 61558
UL 506; EN 61558
Full mounting kit
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Noliktavas stāvoklis patreiz nav pieejams
€ 54,00
€ 54,00 Katrs (bez PVN)
€ 65,34
€ 65,34 Katrs (Ieskaitot PVN)
1
€ 54,00
€ 54,00 Katrs (bez PVN)
€ 65,34
€ 65,34 Katrs (Ieskaitot PVN)
Noliktavas stāvoklis patreiz nav pieejams
1
| Daudzums | Vienības cena |
|---|---|
| 1 - 9 | € 54,00 |
| 10 - 24 | € 51,00 |
| 25 - 49 | € 45,50 |
| 50 - 74 | € 40,10 |
| 75+ | € 34,70 |
Tehniskie Dokumenti
Specifikācija
Brand
Nuvotem TalemaProduct Type
Toroidal Transformer
Primary Voltage
230 V ac
Secondary Voltage
2 x 18 V ac
Number of Outputs
2
Secondary Current
420mA
Weight
300g
Power
15VA
Diameter
60mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
450Hz
Minimum Operating Temperature
0°C
Maximum Operating Temperature
180°C
Termination Type
Copper Conductor Termination Wire
Height
31mm
Standards/Approvals
UL5, UL506, VDE0550, EN60065, BS415, EN61558
Produkta Apraksts
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
UL 506; EN 61558
UL 506; EN 61558
Full mounting kit
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.