Fluke Inspection Window for Use with NEMA 12 Enclosure, NEMA 4 Enclosure

Fluke Infrared Red (IR) Inspection Windows

The ClirVu® IR windows from Fluke increase the safety and speed of electrical thermal imaging inspections. These inspection windows also reduce the risk of arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive maintenance.

• Quick and easy installation, just 5 minutes with one technician
• Only one hole required with standard Greenlee® punch (rear access required for punch connection only)
• Installs from front, no template needed or rear access required
• Grounds instantly to metal enclosure with patent pending AutoGround™ process
• Sharp teeth on jam nuts assure four gas-tight ground connections
• All components have electrically conductive finishes for optimum grounding
• Work permit requirements and NFPA 70E processes are significantly reduced
• Full PPE is often not required so inspections are done fast and easy
• Superior arc blast protection
• High temperature silicon gaskets
• Mounting and door latches provide high pressure gasket compression
• Die cast components are manufactured with the highest strength alloys
• Jam nut screws are made from 4037 steel, heat treated to 160,000 psi tensile
• IP67 Protection
• Corrosion and UV resistance for challenging outdoor environments
• Three sizes 50mm, 75mm and 95mm with the option of hand turn or security key door latches

Notes

Stock nos. 820-2998 and 820-3002 have a keylock.

Standards

Torture Tested to the highest test ratings: IEEE C37.20.7 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE.