Sensata Crydom DRC Series Solid State Relay, 4.8 A Load, DIN Rail Mount
Tehniskie dokumenti
Specifikācija
Brand
Sensata / CrydomMaximum Load Current
4.8 A
Mounting Type
DIN Rail Mount
Control Voltage Range
18 V ac → 30 V ac, 18 V dc → 30 V dc
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 V ac → 510V ac
Series
DRC
Depth
96.02mm
Height
86.71mm
Length
45.31mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Izcelsmes valsts
Mexico
Produkta apraksts
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
€ 84,00
€ 84,00 Katrs (bez PVN)
€ 101,64
€ 101,64 Katrs (Ieskaitot PVN)
1
€ 84,00
€ 84,00 Katrs (bez PVN)
€ 101,64
€ 101,64 Katrs (Ieskaitot PVN)
Noliktavas stāvoklis patreiz nav pieejams
1
Noliktavas stāvoklis patreiz nav pieejams
Tehniskie dokumenti
Specifikācija
Brand
Sensata / CrydomMaximum Load Current
4.8 A
Mounting Type
DIN Rail Mount
Control Voltage Range
18 V ac → 30 V ac, 18 V dc → 30 V dc
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 V ac → 510V ac
Series
DRC
Depth
96.02mm
Height
86.71mm
Length
45.31mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Izcelsmes valsts
Mexico
Produkta apraksts
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.