RS PRO Thermal Paste, 3.4W/m·K
Tehniskie dokumenti
Specifikācija
Brand
RS ProThermal Conductivity
3.4W/m·K
Maximum Operating Temperature
+125°C
Minimum Operating Temperature
-30°C
Operating Temperature Range
-30 → +125 °C
Izcelsmes valsts
Taiwan, Province Of China
Produkta apraksts
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 89,50
Katrs (bez PVN)
€ 108,30
Katrs (Ieskaitot PVN)
1
€ 89,50
Katrs (bez PVN)
€ 108,30
Katrs (Ieskaitot PVN)
1
Pirkt iepakojumos
| Daudzums | Vienības cena |
|---|---|
| 1 - 5 | € 89,50 |
| 6 - 14 | € 85,00 |
| 15+ | € 83,50 |
Tehniskie dokumenti
Specifikācija
Brand
RS ProThermal Conductivity
3.4W/m·K
Maximum Operating Temperature
+125°C
Minimum Operating Temperature
-30°C
Operating Temperature Range
-30 → +125 °C
Izcelsmes valsts
Taiwan, Province Of China
Produkta apraksts
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.