HARWIN Spring Test Probe With Serrated Tip
Tehniskie dokumenti
Specifikācija
Brand
HARWINLength
16.35mm
Body Material
Phosphor Bronze
Contact Resistance
30mΩ
Probe Tip Type
Serrated
Izcelsmes valsts
Taiwan, Province Of China
Produkta apraksts
RS Pro Spring Probe with Crosscut Head
Brought to you under the trusted RS Pro Brand, this crosscut headed spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The crosscut head is ideal for test lands, pads and leads. The sharp points penetrate and provide excellent electrical contact.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 2,84
Katrs (Paka ir 5) (bez PVN)
€ 3,436
Katrs (Paka ir 5) (Ieskaitot PVN)
5
€ 2,84
Katrs (Paka ir 5) (bez PVN)
€ 3,436
Katrs (Paka ir 5) (Ieskaitot PVN)
5
Pirkt iepakojumos
| Daudzums | Vienības cena | Per Iepakojums |
|---|---|---|
| 5 - 20 | € 2,84 | € 14,20 |
| 25 - 45 | € 2,626 | € 13,13 |
| 50 - 95 | € 2,414 | € 12,07 |
| 100+ | € 2,20 | € 11,00 |
Tehniskie dokumenti
Specifikācija
Brand
HARWINLength
16.35mm
Body Material
Phosphor Bronze
Contact Resistance
30mΩ
Probe Tip Type
Serrated
Izcelsmes valsts
Taiwan, Province Of China
Produkta apraksts
RS Pro Spring Probe with Crosscut Head
Brought to you under the trusted RS Pro Brand, this crosscut headed spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The crosscut head is ideal for test lands, pads and leads. The sharp points penetrate and provide excellent electrical contact.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)